How to know the status of the mwi led remotely

This solution apply for phones registered with CME call manager express

From the command line type the following command

sh ephone registered

This command will display :

ephone-1[0] Mac:0025.84A1.84EC TCP socket:[1] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 20/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:9
IP:192.168.10.22 * 50118 7942 keepalive 239 max_line 2 available_line 2
button 1: cw:1 ccw:(0 0)
dn 1 number 100 CH1 IDLE CH2 IDLE mwi
Preferred Codec: g711ulaw
Lpcor Type: none

Notice that ephone-1 has MWI on
ephone-2 has MWI off


ephone-2[1] Mac:0015.FA48.9431 TCP socket:[3] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 8/8 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
IP:192.168.10.130 * 2499 7912 keepalive 202 max_line 1 available_line 1
button 1: cw:1 ccw:(0 0)
dn 2 number 300 CH1 IDLE CH2 IDLE
Preferred Codec: g711ulaw
Lpcor Type: none

Advertisements
This entry was posted in Troubleshooting and tagged . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s